15.5′ Tri-Deck 65 Rotary Mower
Assemblies are interchangeable.
Spindles are greaseable from top side without removing the belt shields. Spindles can be removed form deck without disassembly.
3/16? Steel Deck is formed and welded, with bracing at high stress areas to provide maximum structural strength. Open back discharge allows clippings to be dispersed without bunching up, leaving an after cut appearance, second to none.
Automatic Wing Lock system is deactivated from the tractor seat. System control values regulate the lifting and lowering speed of the mower decks. Automatic safety locks hold all decks in place with the hydraulics disconnected. All PTO shafts run at the minimum angle for maximum life expectancy.
Heavy Duty Gear Box, with machined and case hardened gears, transmits power to the mower decks. All PTO shafts have Ring Lock collars instead of pins for additional safety. Oil level dip stick and drain plug allow for easy maintenance.
Main Frame and Wings are fabricated from heavy wall structural
Excellent Floatation is obtained with 12 large low pressure
floatation tires, all staggered, providing minimum soil penetration and
compaction. Cutting height adjustment can be simply done by removing
lynch pin from top of each castor stem and moving the spacers either
above or below support tube as required. Wheel hub and castor pivot are
greaseable. Replaceable castor pivot
Narrow Transport Width is achieved without disconnecting PTO shafts. High speed highway transport tires (Optional) allow mower to be moved conveniently to distant locations. Easily change blades with all decks in raised position. Anti-scalp rollers (Optional on 15 ft) are attached on both wing decks.