PRO22

Daily maintenance and servicing can be easily performed in the field. The PTO
shafts have Ring Lock collars for easy removal and additional safety. All blade
spindle assemblies can be easily removed from the deck as a complete unit. The
blade spindles are greaseable from the top side of the decks, through lubrication
holes in the belt guards. Belt guards have wing nut hold downs for fast removal
without tools. All mower deck components are totally interchangeable, for easy
servicing.

bearings. A nut and lock washer hold assembly together. All spindle bearings.
A nut and lock washer hold assembly together. All spindle assemblies are
interchangeable. Blades are attached to the support bar with 2- 1/2" x 1-3/4"
bolts.

2- 1/2" x 1-3/4" bolts.

Extra Plates Welded on spindle locations to give additional support. Spindles
are greaseable from top side without removing the belt shields. Spindles can
be removed form deck without disassembly.

3/16" Steel Deck is formed and welded, with bracing at high stress areas to
provide maximum structural strength. Open back discharge allows clippings to
be dispersed without bunching up, leaving an after cut appearance, second to
none.

Heavy Duty Gear Box, with machined and case hardened gears, transmits
power to the mower decks. All PTO shafts have Ring Lock collars instead of
pins for additional safety. Oil level dip stick and drain plug allow for easy
maintenance.

Automatic Wing Lock system is deactivated from the tractor seat. System
control values regulate the lifting and lowering speed of the mower decks. All
PTO shafts run at the minimum angle for maximum life expectancy.

Easily Change Blades with all decks in raised position. Automatic safety locks
hold all decks in place with the hydraulics disconnected. Anti-scalp rollers are
attached on both wing decks.

Excellent Floatation is obtained with 12 large low pressure floatation tires, all
staggered, providing minimum soil penetration and compaction. Cutting height
adjustment can be simply done by removing lynch pin from top of each castor
stem and moving the spacers either above or below support tube as required.
Wheel hub and castor pivot are greaseable. Replaceable castor pivot
bushings. Six rigid, "In-Line" tires keep mower in place while mowing along
hillsides.

Narrow Transport width of 9-1/2 ft is achieved without disconnecting PTO
shafts. Radial automotive tires allow mower to be moved conveniently to
distant locations.