PRO15

of the spindle distributes lubrication to both bearings. All spindle of
the spindle distributes lubrication to both bearings. All spindle
assemblies are interchangeable.

assemblies are interchangeable.

Spindles are greaseable from top side without removing the belt
shields. Spindles can be removed form deck without disassembly.
Blades are attached to the support bar with 2- 1/2" x 1-3/4" bolts.

3/16" Steel Deck is formed and welded, with bracing at high stress
areas to provide maximum structural strength. Open back
discharge allows clippings to be dispersed without bunching up,
leaving an after cut appearance, second to none.

Automatic Wing Lock system is deactivated from the tractor seat.
System control values regulate the lifting and lowering speed of the
mower decks. Automatic safety locks hold all decks in place with the
hydraulics disconnected. All PTO shafts run at the minimum angle
for maximum life expectancy.

Heavy Duty Gear Box, with machined and case hardened gears,
transmits power to the mower decks. All PTO shafts have Ring Lock
collars instead of pins for additional safety. Oil level dip stick and
drain plug allow for easy maintenance.

Main Frame and Wings are fabricated from heavy wall structural
tubing with high stress areas reinforced. All pivot locations are
greaseable. A greasing schedule is attached for easy maintenance.
All PTO shafts run at the minimum angle for maximum life
expectancy.

Excellent Floatation is obtained with 12 large low pressure
floatation tires, all staggered, providing minimum soil penetration
and compaction. Cutting height adjustment can be simply done by
removing lynch pin from top of each castor stem and moving the
spacers either above or below support tube as required. Wheel
hub and castor pivot are greaseable. Replaceable castor pivot
bushings. Six rigid, "In-Line" tires keep mower in place while mowing
along hillsides.

Narrow Transport Width is achieved without disconnecting PTO
shafts. High speed highway transport tires (Optional) allow mower
to be moved conveniently to distant locations.
Easily change blades with all decks in raised position. Anti-scalp
rollers (Optional on 15 ft) are attached on both wing decks.