TD92 TRI-DECK    SPECIFICATIONS
DESCRIPTION
TD 92 (22 FT)
Cutting Width
22 Feet
Cutting Height
¾" to 5" - ⅜" steps
Easy to use spacer bushing allow adjustment.
Transport - Width
                 - Height
                 - Length          
9½ Feet
10 Feet
16 Feet
Ground Clearance
9¼"
Weight
4100 Pounds
Tongue Weight
   - Transporting
   - Mowing
Ground Pressure
7 Pounds per sq. in.
Recommended HP
45 Min. - 70 Max. PTO
Mowing Capacity
   - 2 MPH
   - 4 MPH
   - 6 MPH
   -7.5 MPH
Acres Per Hour
5.4
10.7
16
20
360 Degree Turn
0" Uncut Circle
Number of Spindles
9 spindles
Spindles
35mm diameter spindles are each carried in 2 greaseable
ball bearings which are housed in precision machined hub.
Blade Support
¾" x 2½" x 11½" long bar welded to spindle and machined.
½" bolts hold blade rigid to provide a clean, level cut.
Blades
High lift, heat treated, alloy steel blades
5/16" x 2½" x 32"- 3 per deck.
Optional: Low Lift Blades
Number of Tires
10 on decks, 2 transport on main frame
Deck Tires
18 x 9.5 x 8 NHS, 4 ply pneumatic tires mounted on 5 bolt
wheels. All hubs and caster pivot bushings are replaceable
and greaseable.
Transport Tires
P275/60SR 15" automotive radials.
Axles
Rated at 4000 lbs. each and are greaseable.
Wheels
6 bolt, 6" bolt circle.
Deck Construction
A single piece 3/16" steel plate formed and welded with
supporting members at high stress areas to achieve
maximum structural strength. Deck is 5" deep.
Deck Flexibility
25° up 15° down, 12° front to back
Deck Drive
PTO shaft to right angle gear box driving. 2-"B" section belts
to 3 heavy duty spindles.
Belt Adjustment
Easily made by loosening four bolts at gear box base and
adjusting the slide plate forward or backward and
retightening.
Main Gear Box
4 shaft gear box with 1⅜" - 6 spline shafts, delivering power
to decks.
PTO Shafts
Telescoping, agricultural PTO
Drive shafts, with proper safety shields.
1⅜" - 6 spline quick-disconnect yokes on both ends with
Ring Lock collars.
Input PTO ...Category # 6
Deck PTO ...Category # 4
Speeds
Tractor PTO - 540 RPM
Blades - 2215 RPM
Blade Tip Speed - 18,547 F.P.M
Cylinders
Rear deck: 1- 2½" x 16" double acting.
Wing decks: 2- 3" x 16" double acting.
"A" Frame
Hollow structural steel tubing with supports at high stress
areas to achieve maximum strength.
Hitch
4 positions, with height settings from 10½" to 15". Safety
chain with hook according to Dept. of Transport regulations.
Screw Jack
2000 lbs. top wind jack for easy hook up.
Paint Finish
Electro-statically painted with oven baked finish.